[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ET) blade speed

Subject: (ET) blade speed
From: Rod Hower <rodhower ameritech net>
Date: Tue, 23 Mar 2004 19:37:43 -0800 (PST)
In-reply-to: <007901c4114c$3860a120$4d6a9a0c@yourd5cs6iryfl>
List-archive: <http://cosmos.phy.tufts.edu/mhonarc/elec-trak>
List-help: <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=help>
List-id: Electric tractor discussion list <elec-trak.cosmos.phy.tufts.edu>
List-post: <mailto:elec-trak@cosmos.phy.tufts.edu>
List-subscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=subscribe>
List-unsubscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=unsubscribe>

I'm replacing all 3 PM motors on my mower deck
with my variable speed BLDC motor control (Why?
because I salvaged these high dollar motors
from the trash can at work and it has my variable
speed drive).
Anyhow, what is the target RPM for these motors, no
load and mowing reasonable grass.
Thanks,
Rod
www.qsl.net/w8rnh
http://www.qsl.net/w8rnh/evh/image1.html
The 47 frame motor I plan on using is just above
my Fluke multimeter, similar but I have a longer
stack length for the Etrak.
Rod

References:
- Re: (ET) Somebody needs to be shocked!!
  - From: Mike Wallace

Prev by Date: Re: (ET) Somebody needs to be shocked!!
Next by Date: (ET) pulls
Previous by thread: Re: (ET) Somebody needs to be shocked!!
Next by thread: Re: (ET) Somebody needs to be shocked!!
Index(es):
- Date
- Thread