[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Bearing Press
The bearings are not on that tight. I used to rig up a standard pulley
puller to work , but since then I bought a bearing separator which I
believe
is the correct tool for the job. I don't remember how I put new ones on,
which means it was pretty easy.
The blade mounting flange can be tough but should succumb to heat and
kroil.
- SteveS
----- Original Message -----
From: <Slaperaski9 wmconnect com>
To: <>
Sent: Saturday, March 13, 2004 12:40 PM
Subject: (ET) Bearing Press
> What size press should I get for pulling bearings on the mower motors? Is
a
> 6-ton press enough?
>
----------------------------------------------------------------------------
----
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>