[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Lift motor control
We just had some discussion on this recently (November, I think).
As I recall, running at higher voltage can work, but with adequate cool
down
time - for example, the tiller load and duty cycle may be too great.
Several
listers run at 24V successfully. Hmmm - Perhaps you could run fast when
taking up slack then throttle down when lifting a load. That would be nice,
esp when running a double pulley for increased lift capacity.
SteveS
E20
----- Original Message -----
From: "Dave & Debbie Barden" <daveb seanet com>
To: <ssawtelle fcc net>; <>
Sent: Tuesday, February 03, 2004 2:32 AM
Subject: Re: (ET) Lift motor control
> could you then run it at say 20 volts get a little more speed out of the
> motor and not harm the motor?
>
> dave
>
> > I think the idea would be to run the controller at no more than 1/2
'power'.
> > If it is a PWM controller then I would think running it at half
> > throttle
> > would provide an average 18V to the motor. I'm getting out of my area
> > of
> > knowledge here, though, so those better informed correct me if I'm
wrong!
> >
> > If this idea is right then one could build a fixed controller that is
50%
> > duty cycle - would be fairly simple.
> >
> > SteveS
> > E20
> >
> > ----- Original Message -----
> > From: "Dave & Debbie Barden" <daveb seanet com>
> > To: <ralphgv centurytel net>; <>
> > Sent: Tuesday, February 03, 2004 12:58 AM
> > Subject: Re: (ET) Lift motor control
> >
> >
> > > the lift motor is only 18v. I think I've seen warnings about
shortening
> > its
> > > life running it at higher voltage. you might check the archives...
> > >
> > > dave
> > > seattle
> > >
> > > > Hi
> > > > I was wondering if anyone has any thoughts on using this controller
for
> > > > running the lift motor on 36 volts? It is rated for 20 amps at 36
volts
> > > > and only $42.00 each. Go to
> > > > http://www.warehousesensations.net/x360_parts and scroll down to
item #
> > > > X360-220 (AKA) "The Brain".
> > > >
> > > > Ralph Vogan
> > > > ralphgv centurytel net
> > > ralphgv centurytel net
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Elec-trak mailing list
> > > Elec-trak cosmos phy tufts edu
> > > https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
> > >
> > >
> >
> >
> >
> > _______________________________________________
> > Elec-trak mailing list
> > Elec-trak cosmos phy tufts edu
> > https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
> >
>
>
>
>
>
>