Re: (ET) drive belts

[cleanpower att net]

My C-185 (E-20) takes an industry standard 3vx335 belt,and I think the 
E-15 
takes the same belt,somebody correct me if I'm wrong.
As I've said before,make SURE that you buy a belt that has cut edges,not 
one 
of the Power-rated belts that are wrapped in fabric. The good 3VX335 belts 
can be bought at NAPA.Let me know if you need anything else for your E-15 
as 
I have a parts E-15.
Harold Zimmerman
> I have a New Idea 150 that I think is a GE 15 hp with a belly mower.  My 
> problem 
> is replacing the drive belts. Are the belts A, B, or C or are they 3, 5, 
> or 7 
> series belts.  There are two belts and I think they are a matched set. 
> The belts 
> that are on the tractor are what I call cog style, as they have dimples 
> cut out 
> of the webbing, so they go easier around the pulleys. Was original 
> equipment cog 
> style or full sided V belts? Any help you can give me will be greatly 
> appreciated.
> 
> Gery Bauman
> Granville, OH
> 
> 1 New Idea 150
> 
> 
> 
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak