RE: (ET) More on wheelweights

["Elie, Larry (L.D.)" <lelie ford com>]

3 Good sized batteries outweighs all the concrete you can put in the box.  
Lead is twice as dense as concrete.

Larry Elie


-----Original Message-----
From: Pieter Litchfield [mailto:plitch attglobal net]
Sent: Wednesday, November 26, 2003 3:32 PM
To: steves; elec-trak cosmos phy tufts edu
Subject: RE: (ET) More on wheelweights


I would think with 3 batteries in a rear box (or 3 batteries sitting on 
some
concrete pavers in the box), you would have plenty of weight for a blower.
I am trying to push a blade or lift 300 lbs (I guess), and traction does 
get
scarce with several concrete blocks in the box, even with chains on my turf
tires.  But since using the blower doesn't require pushing dirt (hopefully
anyway), your traction requirements are likely to be a lot less.  I'd try
just the batteries in the box first, maybe add some blocks on the bottom if
needed, wheel weights as a last resort.


-----Original Message-----
From: elec-trak-bounces cosmos phy tufts edu
[mailto:elec-trak-bounces cosmos phy tufts edu]On Behalf Of steves
Sent: Wednesday, November 26, 2003 10:43 AM
To: elec-trak cosmos phy tufts edu
Subject: Re: (ET) More on wheelweights


The FAQ on the website addresses the issue somewhat:

http://www.ezweights.com/faqs.htm

When our wheels are turned 'in' the hub sticks out a fair amount as I
recall - I need to measure. In this case EZweights doesn't seem too 
positive
about how they mount. I would think it would be preferable to have each
metal bracket a zigzag shape, so it is flat at the bolt holes, then turns
out 90 degrees to the hub distance the 90 degrees again to go across the
hub: In cross section they would be like this:

       ________
___|                |___

Hope that comes out ok. I would think that would be a lot stiffer. Of 
course
I'm looking at adding three batteries in the rear 'toolbox' to run the
blower, so I  may have enough weight anyway.

SteveS
E20
<SNIP>


_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak