Re: (ET) Re: Sep-X Controller Prices

["Steve Richardson" <scr echoweb net>]

Hello Jeff Tickner,

We won't have the install guide until after I install our controller in my
E15.  I'll use it to take pictures and work out the cabling etc.

The controller has the ability to use any golf car throttle pot and
inductive, 0-5K, 5K-0, and several others I can't think of at the moment.
But I'm going to try the 5K-0 on my E15 because it makes it real easy to do
reverse from the same pot using one lever or foot control and one micro
switch to tell direction.

All the other switches, relays, contactors and control board in the ET will
be eliminated by the new controller.
I think the only original wiring left will be for the PTO contactor, 
lights,
battery charger and of course the safety switches if you still use them.

I don't know what you mean by "full support for the brake pedal".  But the
brake pedal switch could be wired in series with the KSI (key switch input)
terminal on the controller.  This is like a "Ready" signal to the 
controller
that makes it come alive when it's at a pack positive potential.  Wire all
your safety switches in series with this terminal and it shuts down the
controller when the line is opened.

Hope this answers all your questions !

Steve
scr echoweb net

----- Original Message -----
From: "Jeff Tickner" <JeffT softlanding com>
To: "elec trak" <elec-trak cosmos phy tufts edu>
Sent: Tuesday, November 11, 2003 6:39 AM
Subject: Re: (ET) Re: Sep-X Controller Prices


>
> Any chance you can release the "install guide" before the controller
starts
> shipping so I can have the wiring ready?
>
> What is the speed control going to be, a pot or will it use the current
> "speed control" with micro-switches?
>
> It will have full support for the brake pedal right?
>
> Jeff Tickner
> Technical Support
> 800-545-9485, Ext 536
> SoftLanding Systems
>
>
> |---------+-------------------------------------->
> |         |           "Steve Richardson"         |
> |         |           <scr echoweb net>          |
> |         |           Sent by:                   |
> |         |           elec-trak-bounces cosmos ph|
> |         |           y.tufts.edu                |
> |         |                                      |
> |         |                                      |
> |         |           11/10/2003 10:39 PM        |
> |         |                                      |
> |---------+-------------------------------------->
>
>---------------------------------------------------------------------------
--------------------------------|
>   |
|
>   |        To:
|
>   |        cc:
|
>   |        Subject:
|
>
>---------------------------------------------------------------------------
--------------------------------|
>
>
>
>
> Hi Chris,
>
> We are waiting for all the parts to arrive to build the first 100.
>
> We expect them to arrive by the end of next week and for the first
> production run to start the following week.  I'm still working on the
> automated test station as well, so that may be the biggest hold up.
>
> I'll keep everyone informed.
>
> Thanks for your inquiry Chris.
>
> Steve
> scr echoweb net
>
>  ----- Original Message -----
>  From: Christopher Meier
>  To: Steve Richardson ; elec trak
>  Sent: Monday, November 10, 2003 6:41 PM
>  Subject: Re: Sep-X Controller Prices
>
>  It's been 4 more weeks, what's the latest on these controllers?
>   ----- Original Message -----
>   From: Steve Richardson
>   To: Christopher Meier ; elec trak
>   Sent: Wednesday, October 15, 2003 8:59 PM
>   Subject: Re: Sep-X Controller Prices
>
>   Hi Chris and everyone,
>
>   Chris here are the prices you requested for the 400 and 500 amp Sep-X
>   controllers, I also included the price for the 300 amp I gave you
>   earlier.
>
>   300A - Under $200
>   400A - $250-$300
>   500A - $350- $400
>
>   Sorry we can't nail it down any closer, but since we do not have full
>   production up yet we can't possible know what the cost will really be.
>   But rest assured it won't go over the larger numbers.
>
>   Thanks for your inquery and sorry it took so long...
>
>   Steve
>   scr echoweb net
>
>    _______________________________________________
>   Elec-trak mailing list
>   Elec-trak cosmos phy tufts edu
>   https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>
>
>
>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>
>