Re: (ET) Replacing snowthrower chain-need advice

["SteveS" <ssawtelle fcc net>]

Mine had a removable link - don't know if that is OEM or not. If that is 
the
case, coming off is easy. Putting on is a bit harder as you need to pull 
the
free ends together close enough to get the link back in.

- SteveS
E20
E12S

----- Original Message -----
From: "Richard Zachary" <njcfsa earthlink net>
To: "Elec-trak list" <>
Sent: Friday, August 15, 2003 10:42 AM
Subject: (ET) Replacing snowthrower chain-need advice


> Am replacing snowthrower chain that turns the auger.  Can't find a
> description of how to do this on the elec-trak.org site.  Looks like if
> I remove the bolt above the spring that seems to control tension and
> maybe take off the whole bolt and spring mechanism, that the motor might
> pivot down.  I could then possibly get the chain off the motor gear.  Is
> there enough space to get the chain off the large gear on the end of the
> auger because it doesn't quite look like it.
> Any advise would be appreciated.
> Thanks in advance,
> Richard "Zack" Zachary
> E12
>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>