[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Large Frame Mower Deck



A very important item, Make sure the blades are turning in the correct rotation.  Due to dynamic braking, this is a 2 man operation.  I have seen many of motors either not wired correct on top with the wires reversed.
Garry East TN


  At 05:37 PM 7/5/2003 -0700, D Howell wrote:
Andrew, as I mentioned yesterday, I have the same cut problems as you do.  Here are the responses to your survey.
 
Deck model #  - 26AA42LA
rear discharge
with baffles
number of spacers - 2
OEM deck
I-5 serial # - 26CE20CA
I also measured the length of by blades.  They are 14 1/4 inches long.  They appear to be in the same plane and are sharp (sharpened them 3 weeks ago). 

 
Darryl Howell
Smyrna GA

Andrew Poush <agp vt edu> wrote:
I was thinking about this some more and I realized that there are more
questions I need to add to the survey. So to repeat all the current
questions plus the new ones:

So now to a question:
Does anyone out there use a large frame deck to successfully cut the
lawn in only one cut?

And a survey:
Can all those with large frame mowers tell me: 1) How many cuts does
it take to do your lawn? 2) Side or rear discharge? 3) With or
without baffles? 4) What is cut height (number of spacers below front
wheel caster bearing)? 5) What numbers and/or text appears on the
deck nameplate? 6) Is deck OEM? 7) If it came with the ET, what is ET
s/n?


_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak