[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) ET Loader.



I do think, as an ET loader user, that Rob's point is well taken.  As I said in my earlier post, I can feel the frame flex a bit when I pick up a moderately full bucket.  In fact, I was thinking about adding a heavy angle subframe under the middle of the 'Trak just to beef it up, but the loader subframe may make that difficult.  I think the E-15 (and I assume the 20 is about the same structurally) is really near its design limits with the bucket loader, and  the stresses associated with even normal twists and jolts that go with careful and appropriate use will eventually weaken the frame platform and front end.
----- Original Message -----
Sent: Friday, January 03, 2003 11:16 AM
Subject: RE: (ET) ET Loader.

You can break anything given the... desire?
 
I bought an Farmall 'H' once for parts; that's a full size farm tractor.  Casting broke clean in the middle.  Turns out the guy left the loader on, about 10" from the ground, and tried to do some ground work at high speed at the edge of a pond.  The tractor bounced at about 6 MPH, the bucket dug into the sand, and the back wheels came up a foot or so.  The casting broke.
 
I have used loaders on larger farm equipment with and without power steering.  The real key is how and when.  On packed ground or pavement you are OK.  On soft stuff you have to move to turn the wheel.  Although I don't have a GE loader, I wouldn't be afraid of it.
 
Larry Elie
 
-----Original Message-----
From: oleoranch aaahawk com [mailto:oleoranch aaahawk com]
Sent: Sunday, December 29, 2002 11:05 AM
To: elec-trak cosmos phy tufts edu
Subject: (ET) ET Loader.

    Just a note here, Do not overload when working with the loader.    I have gotten several free Elec-Traks with loaders where the tractors were broker in half form the loader.    Rob.
No trees were destroyed in the creation of this E Mail, however many electrons were severely inconvenienced!  RAV (DofTI)