[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Any suggestions?



On 5 Aug 2002 at 21:16, Habooly1 wmconnect com wrote:

> Could
> anyone give me some suggestions as to why the resistor glows red?

Check your motor field connections.  No power to the field could cause 
this 
symptom.  Also check your field relay (if you have one; I'm not familiar 
with 
the E12 setup) or reversing relay.

Check for mechanical constraint on the motor -- a seized motor or 
transaxle 
bearing, for example.

David Roden
Akron OH USA