Re: FW: (ET) e15 reverse but no forward

["David Roden (Akron OH USA)" <roden ald net>]

On 31 Jul 2002 at 9:15, Steve Caplan wrote:

> I got an E15 in 1984 most of the connectors on the control board were 
> loose
> or corroded. I soldered all the wires directly to the board.

This would work, but I'm too much of a purist to do this.  I had trouble 
with mine and took the laborious route.  I gently cleaned every pad on the 
board with fine steel wool, and cleaned the connectors with a sliver of 
400-
grit sandpaper.  Then I applied (lightly) Cramolin Blue.  No problems 
since 
then.


David Roden - Akron, Ohio, USA
1991 Solectria Force 144vac
1991 Ford Escort Green/EV 128vdc
1970 GE Elec-trak E15 36vdc
1974 Avco New Idea 36vdc
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Thou shalt not send me any thing which says unto thee, "send this to all   
  
   
thou knowest."  Neither shalt thou send me any spam, lest I smite thee.    
  
       
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =      
  
 
Est. yearly US cost to safeguard Persian Gulf oil supply: $50 billion      
  
       
Est. 2001 value of US crude oil imports from Persian Gulf: $19 billion  
                                -- Harper's Index, April 2002              
      
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =