Re: (ET) e15 reverse but no forward

[fred whitridge <fw ix netcom com>]

You guys are great!  (didn't even have to bother Bill Gunn).  The
problem was one of the flakey crimp on connectors which slide onto the
edge of the adjacent card, next to the reverse relay.  Can/should these
be soldered on?

Fred

"Rhett T. George" wrote:

>  - Greetings -
>
> Frank has a curious problem with his E-15.
>
> It sounds as tho one or the two contact sets is not making when the
> relay releases for forward operation or that one of the leads to the
> upper, fixed contacts does not make a good connection.  The essence
> is that there is no field current in the forward position.  The
> armature is all set with lots of current and no field to work with.
>
> Hope this helps.  Keep on Trakin'
>
>                                         Rhett George

--
Fred Whitridge
Archipelago Corp
66 Field Point Road, 2d Floor
Greenwich, CT 06830
203.661.7747
203.661.6558 = fax