Re: (ET) tiller plug and cord.

["goodguyforsure" <goodguyforsure hotmail com>]

Yes, complete. Rebuilt motors, painted. Around $1300.00. I am getting some
other stuff too, so the exact price escapes me. Its a couple hundred more
with brand new motors.
john briese
----- Original Message -----
From: "poweredbysun" <jimlynch poweredbysun com>
To: "goodguyforsure" <goodguyforsure hotmail com>
Sent: Tuesday, June 11, 2002 8:36 PM
Subject: Re: (ET) tiller plug and cord.


> How much is a complete new deck?
> You mean the cutting deck with three motors?
> Thanks,
> Jim Lynch
> goodguyforsure wrote:
> >
> > Tilling today and tiller quit. I thought maybe the overload shut it
down.
> > This surprized me since I had been careful to keep power use down in
yellow.
> > I went to check to see if mower would run. Tiller plug was hot! Took it
> > apart and one of the screws was stripped making a loose connection.  
> > Now
the
> > question. The cord says standard stove cord, 2-#6 and 1#3. The #3 wire
is
> > the stripped one, of course.  Is this the proper cord and can I swap 
> > the
#6
> > for the number 3? The blades in the plug are interchangeable, so since 
> > I
> > only need to wires, any problem here?
> > Thanks
> > John Briese
> > btw, am picking up a complete new deck from Bill Gunn on tuesday. Can't
> > wait.
> > ----- Original Message -----
> > From: "poweredbysun" <jimlynch poweredbysun com>
> > To: "Elie, Larry (L.D.)" <lelie ford com>
> > Cc: "'Neil Dennis'" <wombat RealNS com>; "Elec-trak"
> > <elec-trak cosmos phy tufts edu>
> > Sent: Tuesday, June 11, 2002 2:47 PM
> > Subject: Re: (ET) maore tiller
> >
> > > What kind of oil do you use in the tiller cup?
> > > From the owner's manual, it seems like
> > > the only thing lubricated is the chain.
> > > How much oil should be in there?
> > > My tiller leaks. A coworker said an
> > > old timer told him STP oil treatment
> > > and gear oil mixed 50/50 would stop
> > > his tiller's leak. It worked for him
> > > on his gas tiller.
> > > Does this sound like an acceptable
> > > combination?
> > > Thanks,
> > > Jim Lynch
> > > > Larry
> > > >
> > > > -----Original Message-----
> > >
> > >
> > > > Wonder where the "oil cup" is, haven't recognized one on mine  ?
> > >
>