|
Related question:
This weekend I was mowing and, at one point, was backing up. I was looking backwards and didn't see the back of the mower catch on something which tilted the deck up to the point where one shock end broke off at the mower deck (from hitting the stop in the bracket). I guess this is the downside of the the tilt-up which makes cleaning so easy? Or am I missing something? I don't recall reading anyone else have this happen. SteveS E12S ----- Original Message ----- From: "Christopher Zach" <czach computer org> To: "Elec-trak" <elec-trak cosmos phy tufts edu> Sent: Monday, May 06, 2002 9:57 AM Subject: (ET) Shock repair followup > Thanks for all the tips on fixing the mower shocks. It turns out the problem > was the pin sheared off. Here are a few thoughts for replacement: > > 1) Go to the hardware store and get a punch/drift along with the new pin. It > costs $3.00 but the punch makes driving the old pin out to be a simple task. > Little screwdrivers/allen wrenches/etc will not work and will only waste > your time. > > 2) When putting the new pin in, I found the best way to compress the shock > was to put it back on the E20 and deck, then drive the deck into a wall > (really slowly). This compressed the shock, the brake held the E20, and I > simply tapped in the new pin with a hammer and (when it got flush with the > outside of the shock) the above mentioned drift. Very gentle taps are all > that is needed. > > Takes no time at all to do. > > |