[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ET) weight box
- Subject: (ET) weight box
- From: Neil Dennis <wombat RealNS com>
- Date: Thu, 28 Mar 2002 15:49:05 -0500
- Sender: owner-elec-trak cosmos phy tufts edu
the weight box is 8" x 8" x 22" made from about 16 ga steel. Mounts by
two "bayonets" that stick into the slots on the sides of the frame, can
be mounter on either front or back.
Be careful on stalling lift motor, I worked one pretty hard and ended up
rewinding the armature after it burned out. Don't know that it is
hooked up thru any fuse, mine isn't.
wombat