Re: (ET) Front Bracket

[jim <fiskfarm mediaone net>]

No , there are 2 pins about 3" long. Spray BreakAway or an equal on them
over night and if that doesn't do it get out the torch. They aren't usually
too bad. Keep them greased in the future. Good luck.

Jim

"Elie, Larry (L.D.)" wrote:

> The pins on either side that the mower arms mount to.  I think it's
> just a single rod running all the way through the tractor frame but
> I'm at work so I can't put my head under the frame to look.
>
> Thanks.
>
> Larry Elie
>
> -----Original Message-----
> From: jim [mailto:fiskfarm mediaone net]
> Sent: Tuesday, November 21, 2000 2:41 PM
> To: Elie, Larry (L.D.)
> Subject: Re: (ET) Front Bracket
>
> Hey Larry,
>
> Which pin? or are you referring to the 2 pins one on either side? or the
> axle pin? Let me know and I will try to help.
>
> Jim
>
> "Elie, Larry (L.D.)" wrote:
>
> > I finally have (bought) a front-mounting bracket for the full
> > frame tractors.  Fine.  Now how does one get the mounting pin
> > off the frame?  It might be just rusted or frozen, but a pretty
> > good whack with a small sledge didn't budge it.  I have a torch
> > available, but want to make sure there isn't some other trick
> > before I get the torch hot.
> >
> > Suggestions?
> >
> > Larry Elie