[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ET) F-N-R cam
- Subject: (ET) F-N-R cam
- From: Neil Dennis <wombat RealNS com>
- Date: Wed, 02 Aug 2000 11:19:16 -0400
- Sender: owner-elec-trak cosmos5 phy tufts edu
I looked at an extra ass'y I had, didn't see an obvious registration
mark. The wheel has to be engaged so none of the micro switches are
activated when in N position, just be careful that it isn't 180 degrees
out, the side with the 3 "bumps" should engage the switches in seauence
when moving up the F slot.
BTW, check the micro-switches while they are available, they do get
sticky after time and cause jumpy "shifting"