Re: (ET) ET PTO

[John <etrak jvlnet com>]

Larry; If you want me to I will ask Bill when I talk to him later this 
week. I know that he has
complete motor spec prints as I have seen some when he pulled a print to 
show me some
particulars on my machine. John

Larry Elie wrote:

> Almost forgot; I also need the RPM for the snow blower and tiller 
> motors...
>
> Larry Elie
>
> ----------
> From:   Larry Elie[SMTP:lelie pobox srl ford com]
> Sent:   Tuesday, June 15, 1999 9:17 AM
> To:     'Dean A. Stuckmann'; Elec-Trac List Server
> Subject:        RE: (ET) ET PTO
>
> OK, I really need to know so that I can plan a bit.  I know the rated 
> RPM for the
> mower motors is 3600.  Does anyone know any or all of the following?
>
> The rated or typical input (KW) and/or output power (in KW or HP) for 
> the mower motors?
>
> The rated or typical input (KW) and/or output power (in KW or HP) for 
> the snow blower motor?
>
> The rated or typical input (KW) and/or output power (in KW or HP) for 
> the tiller motor?
>
> I mean continuous power, not short cycle, but that would do if I have to.
>
> I WOULD mount an electric motor, or even two by belt drive IF I can get 
> the pully
> ratio right.  To do that, I need RPM and power.  Since I doubt I will 
> get an actual
> output power, I can estimate based on input power, but I don't even have 
> that.
>
> Larry Elie
>
> ----------
> From:   Dean A. Stuckmann[SMTP:dstuck lakefield net]
> Sent:   Thursday, June 10, 1999 12:04 AM
> To:     Elec-Trac List Server
> Subject:        RE: (ET) ET PTO
>
> ;I mounted a 6 hp "gas" walk behind tiller on the back of my E15, BUT 
> took
> ;the gas motor off and bolted on a spare snow blower motor.  It worked
> ;great.  I'm cheap too.
> ;Dean A. Stuckmann
>
> >Max, I'm cheap.  For example, since I could NOT find a ET tiller 
> >locally,
> I adapted one.
> >Ugly.  Not recommending it.  I took a Sears (Ariens) 32" wide 3 point
> mount tiller with
> >an 8HP gas engine and mounted the hitch on the ET.  Yes, I start that
> noisy 8HP
> >engine, and till in LL with the E12.  I came up with a better height
> control than Sears
> >had as well (no wheel tracks).  It works.  If I had a large enough 
> >motor,
> I would replace
> >the 8HP and connect to the PTO, but I intend to just find a tiller and
> lift.  Necessity is
> >the mother of invention.
> >
> >Larry Elie