[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) First parts to go NLA--Motor spacers



Sent Chris his spacers and now have them listed on the website for when others need such. Decent stockpile on hand:

https://freerangeelectric.com/index.php?main_page=product_info&products_id=293


On 09/21/2020 9:17 pm, Jim Coate wrote:
I have those square spacers. Just not listed on the web site as with many parts.

Jim Coate
www.FreeRangeElectric.com
Home of The Electric Tractor Store

On 09/21/2020 8:26 pm, Chris Zach via Elec-trak wrote:
This isn't good. The two square spacers on my E15 motor have crumbled
and harold has not been able to source replacements. I figured this
time would eventually come and it's time to start figuring out
replacements.

First thought I tried was rubber hose and electrical tape. Seems like
a good idea but the first time the motor loads up the heat will melt
the rubber/plastic and make a mess. Need a high temp solution.

Anyone got any other ideas? Personally I may try making a mold and
building a pair of cubes of JB Weld, then drilling the centers. JB can
handle muffler temperatures (500f) so it should be able to handle a
motor. Any other ideas?

C


--
Jim Coate
www.FreeRangeElectric.com
Home of The Electric Tractor Store