Re: (ET) Bench-testing an Alltrax?

[Tim Maxwell <timmaxwell chartertn net>]

Yes the LED should light. I believe it will flash a throttle error code, 
but there should be light.

Tim M

On 9/2/2019 2:40 PM, Steve Gaarder wrote:
> I pulled my apparently dead Alltrax out of the tractor and put it on 
> the bench.  Following instructions on the Alltrax site, I applied 30 
> volts DC between the B- terminal and pins 5,6,9, and 10.  No light.  
> Does anyone know if the light is supposed to light under these 
> circumstances?
>
> If I can scrounge a Windows machine with a serial port I will try the 
> programming software and see if it responds that way.
>
> Steve Gaarder
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak