[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) shunt
The "Power Use" gauge is essentially a millivolt meter, measuring the
voltage drop from one end of the shunt to the the other. A digital
voltmeter can be used to verify my recollection that the meter is 50
millivolts at full reading.
Sincerely,
Harold Zimmerman
Clean Power Supply
Ephrata PA
On July 7, 2015 at 10:11pm -0400, you wrote:
>Does anyone know the specs on the amp meter? Volts for full scale for
>example? My E12 reads high on amps and the volt meter reads low. I am
>sure I can fix the load meter with everyone's tips on the shunt, not sure
>what can be done with the volt meter.
>
>Rob
>
>Sent from my iPad
>
>> On Jul 7, 2015, at 8:01 PM, john j casey <jjcrmc verizon net> wrote:
>>
>> Yes. To be clear mine is 20" with connectors. Old one was 19" or less
>> with connectors. Old one also 6AWG; amazing the difference an inch or
>> so makes.
>> Jack
>>
>>> On Jul 7, 2015, at 4:55 PM, Neil Dennis wrote:
>>>
>>> MY E12 was the other way, pinned the load meter on any work. I
>>> checked and the shunt wire was wrong according to the manual. IIRC,
>>> the length should be with the connectors so the 18.5 wire length plus
>>> the connector length makes the 20".
>>>
>>> wombat - sorry, been a while
>>>
>>> _______________________________________________
>>> Elec-trak mailing list
>>> Elec-trak cosmos phy tufts edu
>>> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>>
>>
>> _______________________________________________
>> Elec-trak mailing list
>> Elec-trak cosmos phy tufts edu
>> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>
>_______________________________________________
>Elec-trak mailing list
>Elec-trak cosmos phy tufts edu
>https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
------------------------------------------------------
Sent without a computer from my MailBug email machine.
landel.com, 1-855-MAILBUG, getmailbuginfo landel com
------------------------------------------------------