If you have the OEM EMICO meter, that piece attached to the meter
movement that looks like a Luden's Cough Drop can be used to change
the reading a bit. Patience is the key. :)
RJ
On 7/7/2015 4:55 PM, Neil Dennis wrote:
MY E12 was the other way, pinned the load meter on any work. I
checked and the shunt wire was wrong according to the manual. IIRC,
the length should be with the connectors so the 18.5 wire length plus
the connector length makes the 20".
wombat - sorry, been a while
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak