[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) shunt



Does anyone know the specs on the amp meter? Volts for full scale for 
example?  My E12 reads high on amps and the volt meter reads low.  I am 
sure I can fix the load meter with everyone's tips on the shunt, not sure 
what can be done with the volt meter.

Rob

Sent from my iPad

> On Jul 7, 2015, at 8:01 PM, john j casey <jjcrmc verizon net> wrote:
> 
> Yes.  To be clear mine is 20" with connectors.  Old one was 19" or less 
> with connectors.  Old one also 6AWG; amazing the difference an inch or 
> so makes.
> Jack
> 
>> On Jul 7, 2015, at 4:55 PM, Neil Dennis wrote:
>> 
>> MY E12 was the other way, pinned the load meter on any work.  I checked 
>> and the shunt wire was wrong according to the manual.  IIRC, the length 
>> should be with the connectors so the 18.5 wire length plus the 
>> connector length makes the 20".
>> 
>> wombat  - sorry, been a while
>> 
>> _______________________________________________
>> Elec-trak mailing list
>> Elec-trak cosmos phy tufts edu
>> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
> 
> 
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak