[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) PTO and low pack voltage



There is no circuit that does that. It's just the way it is. If voltage is below pull-in or hold- in values, it just plain won't work.You might start taking apart and cleaning connections. Every corroded connection is a voltage drop.

RJ

On 6/9/2012 6:10 PM, john rieffel wrote:
I vaguely recall that there is some circuit that prevents the PTO from
switching on with low pack voltages.  Is this correct?  My backup E-15
seems to lose PTO earlier than my original, and it seems that the
batteries still have plenty of juice in them.   (My alternate's Fuel
gauge also seems to read much lower voltages than my original - even
fully charged (confirmed by handheld meter) it never reads more than
1/3 into the green.  Could these two be related?

jr

_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo.cgi/elec-trak