[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Leaky transmission



George,

The first time I changed the oil in mine I got a leak too.  I found the axle housings that bolt up to the main housing were both very loose.  I tightened them back up and have had no problems since.  It probably wouldn't hurt to check the tightness of all the bolts while you're under there.

Chris

On Tue, May 10, 2011 at 10:39 PM, George Beckett <irishbeckett hotmail com> wrote:
All
 
I drained the gear oil out of my old E14 and replaced it with new gear oil. Thought I was doing my perfectly running tractor a favor. Since doing that it has leaked gear oil pretty good which it never leaked before. Do I need to tear the whole rear end out and replace the seals? (Something I've never attempted) Where does one find such parts for these old peerless rear ends? Thanks in advance!
__________________
Geo
www.myelec-traks.com


 

 




_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo.cgi/elec-trak