[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Elec-trak Digest, Vol 8, Issue 85
How much for the 'tillers?
Pete Bishop
ph: 608-235-9390
e-m: plnsbishop verizon net
Deo Submissus,
In Deo Potens
-----Original Message-----
From: elec-trak-bounces cosmos phy tufts edu
[mailto:elec-trak-bounces cosmos phy tufts edu] On Behalf Of
elec-trak-request cosmos phy tufts edu
Sent: Friday, June 11, 2010 10:29 AM
To: elec-trak cosmos phy tufts edu
Subject: Elec-trak Digest, Vol 8, Issue 85
Send Elec-trak mailing list submissions to
elec-trak cosmos phy tufts edu
To subscribe or unsubscribe via the World Wide Web, visit
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
or, via email, send a message with subject or body 'help' to
elec-trak-request cosmos phy tufts edu
You can reach the person managing the list at
elec-trak-owner cosmos phy tufts edu
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Elec-trak digest..."
Today's Topics:
1. Re: Looking for an Elec-Trak vacuum (Max Hall)
2. Here's my Elec-Trak vacuum rig. (steven1955 comcast net)
3. Re: Here's my Elec-Trak vacuum rig. (Max Hall)
4. Re: Here's my Elec-Trak vacuum rig. (Pestka, Dennis J)
5. New Idea Decals (Clean Power Supply)
6. Re: Here's my Elec-Trak vacuum rig. (Tom G.)
7. Electrak rototillers (Matt O'Brien)
----------------------------------------------------------------------
Message: 1
Date: Thu, 10 Jun 2010 12:49:18 -0400
From: Max Hall <mhall maxmatic com>
Subject: Re: (ET) Looking for an Elec-Trak vacuum
To: elec-trak cosmos phy tufts edu
Message-ID:
<AANLkTimmkxqjiyU9R16yqF7_Ls3kOypEfuifOgw7gEx5 mail gmail com>
Content-Type: text/plain; charset="iso-8859-1"
I bought a wrecked Toro ICE vac/chipper for $50 from my local power
equipment dealer... wrecked *only* in the ICE sense!... and am putting a
chain-drive from an ET snowthrower motor. I am planning on using some 7"
(or
was it 8"?) pneumatic casters from Northern Tool so it can ride at pretty
much a constant height from the ground, off of the right rear of the ET.
Cyclone bin next to it, rear center and left. Pictures this fall!
On Thu, Jun 10, 2010 at 11:36 AM, Christopher Zach
<cz alembic crystel com>wrote:
> George Beckett wrote:
>
>> Anyone out there have an Elec-Trak vacuum? irishbeckett hotmail com
>>
>
> I want one....
>
> Seriously, I have a serious leaf "issue" at my house (around 200 55
> gallon
> bags a year). I use the sweeper to get most of it, but to be honest the
bin
> is small and the sweeper needs to have it's motor speed lowered a bit to
be
> less hard on the grass.
>
> But it does work pretty well overall.
>
> Chris
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>
--
www.maxmatic.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20100610/9961f309
/attachment.htm>
------------------------------
Message: 2
Date: Thu, 10 Jun 2010 17:14:59 +0000 (UTC)
From: steven1955 comcast net
Subject: (ET) Here's my Elec-Trak vacuum rig.
To: elec-trak cosmos phy tufts edu
Message-ID:
<1801185152 4237471276190099694 JavaMail root sz0146a westchester pa mail
co
mcast.net>
Content-Type: text/plain; charset="utf-8"
To George Beckett and all others,
Here's a picture of my vacuum rig:
http://img.photobucket.com/albums/0903/steven1955/Elec-Trak%20Leaf%20Collect
or/Tractorright.jpg
Other pics:
http://smg.photobucket.com/albums/0903/steven1955/Elec-Trak%20Leaf%20Collect
or/
Since these were taken the ancient red cart died so I bought a used
Trac-Vac
cart without the gas blower.
The cart can hold about 2 cubic yards of shredded leaves, versus about 1/3
of a cubic yard that the original GE supplied bag could hold. I fill the
cart 5 to 10 times each year depending on how the wind blows.
Sorry George. It's not for sale.
Steve N.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20100610/8a6163b0
/attachment.htm>
------------------------------
Message: 3
Date: Thu, 10 Jun 2010 13:47:55 -0400
From: Max Hall <mhall maxmatic com>
Subject: Re: (ET) Here's my Elec-Trak vacuum rig.
To: steven1955 comcast net
Cc: elec-trak cosmos phy tufts edu
Message-ID:
<AANLkTin36XVfDSjNb82MPhCxFgfyDCClBYGOCKtmXuas mail gmail com>
Content-Type: text/plain; charset="iso-8859-1"
NICE RIG!
On Thu, Jun 10, 2010 at 1:14 PM, <steven1955 comcast net> wrote:
> To George Beckett and all others,
>
> Here's a picture of my vacuum rig:
>
>
http://img.photobucket.com/albums/0903/steven1955/Elec-Trak%20Leaf%20Collect
or/Tractorright.jpg
>
> Other pics:
>
>
http://smg.photobucket.com/albums/0903/steven1955/Elec-Trak%20Leaf%20Collect
or/
>
> Since these were taken the ancient red cart died so I bought a used
> Trac-Vac cart without the gas blower.
>
> The cart can hold about 2 cubic yards of shredded leaves, versus about
> 1/3
> of a cubic yard that the original GE supplied bag could hold. I fill the
> cart 5 to 10 times each year depending on how the wind blows.
>
> Sorry George. It's not for sale.
>
> Steve N.
>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>
>
--
www.maxmatic.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20100610/c0b43e51
/attachment.htm>
------------------------------
Message: 4
Date: Thu, 10 Jun 2010 12:50:34 -0500
From: "Pestka, Dennis J" <Dennis Pestka Covidien com>
Subject: Re: (ET) Here's my Elec-Trak vacuum rig.
To: <steven1955 comcast net>, <elec-trak cosmos phy tufts edu>
Message-ID:
<3101A09B528B004F9B51A640B7A72F08077DDBA7 TAHAZE-BE01 thcg net>
Content-Type: text/plain; charset="us-ascii"
My homemade vacuum attachment.
Last 2 photos.
http://evalbum.com/227
Thanks;
Dennis
________________________________
From: elec-trak-bounces cosmos phy tufts edu
[mailto:elec-trak-bounces cosmos phy tufts edu] On Behalf Of
steven1955 comcast net
Sent: Thursday, June 10, 2010 12:15 PM
To: elec-trak cosmos phy tufts edu
Subject: (ET) Here's my Elec-Trak vacuum rig.
To George Beckett and all others,
Here's a picture of my vacuum rig:
http://img.photobucket.com/albums/0903/steven1955/Elec-Trak%20Leaf%20Col
lector/Tractorright.jpg
Other pics:
http://smg.photobucket.com/albums/0903/steven1955/Elec-Trak%20Leaf%20Col
lector/
Since these were taken the ancient red cart died so I bought a
used Trac-Vac cart without the gas blower.
The cart can hold about 2 cubic yards of shredded leaves, versus
about 1/3 of a cubic yard that the original GE supplied bag could hold.
I fill the cart 5 to 10 times each year depending on how the wind blows.
Sorry George. It's not for sale.
Steve N.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20100610/fcd67305
/attachment.htm>
------------------------------
Message: 5
Date: Thu, 10 Jun 2010 15:52:34 -0400
From: "Clean Power Supply" <cleanpower att net>
Subject: (ET) New Idea Decals
To: elec-trak cosmos phy tufts edu
Message-ID: <201006101953.o5AJrfeM016610@lx1.localdomain>
Content-Type: text/plain; charset=ISO-8859-1
Good Afternoon,
Some years ago,in talking to Bill Gunn,I asked him about hood emblems for
New Ideas. He said something like "Oh,I threw those out years ago,nobody
wanted stuff like that".
Anyway,I wanted some,so I finally got around to having reproductions made
as decals. If anyone else is interested,let me know.I have them for the
EGT120,EGT150,EGT200.
Sincerely,
Harold Zimmerman
Clean Power Supply
Ephrata PA
------------------------------------------------------------------
Find out how easy email really is -- without a computer! Visit
www.landel.com or send email to getmailbuginfo landel com
------------------------------------------------------------------
------------------------------
Message: 6
Date: Thu, 10 Jun 2010 21:50:44 -0400
From: "Tom G." <wavetech superlink net>
Subject: Re: (ET) Here's my Elec-Trak vacuum rig.
To: Elec-trak cosmos phy tufts edu
Message-ID: <0L3T00GWMUFSUG60 mta5 srv hcvlny cv net>
Content-Type: text/plain; charset=us-ascii; format=flowed
Any pictures of the inside of the vacuum / blower ?
Type of "fan" used.
------------------------------
Message: 7
Date: Fri, 11 Jun 2010 08:28:39 -0700 (PDT)
From: Matt O'Brien <obrienm00 yahoo com>
Subject: (ET) Electrak rototillers
To: Elec-trak cosmos phy tufts edu
Message-ID: <66440 83826 qm web30802 mail mud yahoo com>
Content-Type: text/plain; charset="us-ascii"
I have two working rototillers. One lift.
Thought I'd check here for interest before putting on Ebay.
Located near Reading - Boyertown, PA
________________________________
From: Tom G. <wavetech superlink net>
To: Elec-trak cosmos phy tufts edu
Sent: Thu, June 10, 2010 9:50:44 PM
Subject: Re: (ET) Here's my Elec-Trak vacuum rig.
Any pictures of the inside of the vacuum / blower ?
Type of "fan" used.
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20100611/6b71adaf
/attachment.htm>
------------------------------
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
End of Elec-trak Digest, Vol 8, Issue 85
****************************************