There's a GOOD reason for that. E-12 S & E-15 AA to GA don't HAVE
an RTN relay. The RTN functions are contained in the silicon
skulduggery on Card #1. RJ e s wrote: What is confusing me a bit is the RTN relay, which is on the schematic for the E12 [3a-c on pg 3a-6] and does not seem to exist on my machine, or in some other manuals Keith ---------[ Received Mail Content ]---------- Subject : Re: (ET) trouble...she no go Date : Sun, 10 Aug 2008 10:49:34 -0400 (EDT) From : "e s" <stupidemail5 lycos com> To : <elec-trak cosmos phy tufts edu> p {margin-top:0px;margin-bottom:0px;} It looks like the switch is in series with the seat switch, so when open it stops all power, IOW the f/r relay doesn't click. So I don't think that is it, unless I am missing something ---------[ Received Mail Content ]---------- Subject : Re: (ET) trouble...she no go Date : Sun, 10 Aug 2008 07:33:02 -0700 (PDT) From : jim donovan <donovan66205 yahoo com> To : e s <stupidemail5 lycos com>, Electric Tractor <elec-trak cosmos phy tufts edu> If it was working prior to doing brake work I would check the brake safety micro-switch. Sounds like it is "on", meaning that the tractor will not drive. Just my thought. Jim --- On Sun, 8/10/08, e s wrote: From: e s Subject: (ET) trouble...she no go To: Elec-trak cosmos phy tufts edu Date: Sunday, August 10, 2008, 8:48 AM So i replaced the fwd/rev relay and it ran just fine, plenty of battery, no worries, just no brakes. fixed the brakes [note, stupid placement of caliper, 1/2 inch different and it would be a 2 minute job] Now she no go. Fwd rev relay clicks back and forth, but no power drain. PTO lights lift all work Have manuals but haven't deciphered the troubleshooting diagrams. Part of the problem is lack of labeling on the machine jumped out the brake and seat switch to test. no dice hints welcome................ _______________________________________________ Elec-trak mailing list Elec-trak cosmos phy tufts edu https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak |