(ET) weeder cult

[Daniel Childress <daniel csuol com>]

Anyone no of a source for a weeder. Coming up on spring and a 36 volt 
weeder would be helpful.  Can use my rotary inverter if necessary.
	Update:  Jacked up my E-15 by mounting 26X12X12 Ag lug tires. 
Had to re engineer several areas.  Add 1.75 inches in spacers between 
the frame and axle in order to get the fenders to clear.  Add about 2 
inches to the  metal strap where the frame attaches to the Trans. 
This done and I find out that the gear shift hole is too small and 
has to be enlarged in order to work as the angle has changed.  The 
tractor looks like it is moving while parked.  New problem- By 
lifting the rear the angle is changed for the front mower lift.  Now 
I am replacing the narrow front tires with the wider ones.  I have 
found that the 16X6.50X8 tires can be replaced with 18X6.50X8's which 
should raise  the front by 1 inch.  I also found that  the drive 
belts were in need of replacement.
	Project continues- purchased a tiller from Keith and found 
that I needed a tool bar to attach the tiller  to the tractor.  Keith 
had one, all is well. Also purchased a sleeve hitch.
	Questions:  1.  Has anyone attached a sleeve hitch to the 
tiller tool bar. Would be nice not to have to remove the tool bar to 
use the sleeve hitch.
		2. It looks like the tool bar could be adapted to use 
a  three point.  Anyone have experience?

	I have also replaced the batteries.   Plan on using the E-15 
to work up to 5 acres of organic gardening.  Spring is coming.  Now 
need to work on the charger.

Dan