Re: (ET) ok, not the fusible link

["Dave & Deb" <daveb drizzle com>]

going through them all very carefully they are fragile, would be a good 
idea. I
found two of mine touching after some sloppy tightening ...

daveb


>
>
> On Mon, 31 Jul 2006, Perry Cain wrote:
>
>> Check both sides of your cards, and look very carefully for solder 
>> traces
>> that have burned off or cracked.  I had the exact problem, and it was a
>> solder trace that had burned.
>
> Thanks Perry, I've started poking around on card 1 after finding some
> threads in the archives from people who had a similar problem, and found
> it was due to a bad connection at card 1 where the forward/reverse relay
> connects to it. Just need to figure out where it makes that connection. 
> :)
> Unfortunately I haven't found on the schematics what number connection on
> the card connects to the forward/reverse relay. I suppose I could just go
> through all of the connectors and clean them up....
>
> Mike
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>
>