[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) E-12 switch panel removal
Is it plastic?
The one on my I-5 is. I never did figure out how to get it off.
I think it is attached to the lower panel at the fold, i.e. the upper and
lower panels are one piece. If so, then the only way to get it off is to
first remove the steering. I'm not going there. Or maybe cut the seam. If
I had a junk body (tractor, not me) I'd destroy it just to see what magic
holds that panel on there. But, I don't.
Original Message -----------------------
From: elec-trak-bounces cosmos phy tufts edu
[mailto:elec-trak-bounces cosmos phy tufts edu] On Behalf Of willaim att
Sent: Monday, September 12, 2005 11:12 PM
To: elec-trak cosmos phy tufts edu
Subject: (ET) E-12 switch panel removal
Before I break something, will someone tell me the easy way to get the
upper panel loose on my E-12? This is the panel with the switches,
headlights, etc. I removed 4 6-32 capscrews and the panel seems to be
Is something else holding it. Access to push on it from the front is
impossible. Thanks for any help.
Bill Alburty E-12 KC
Elec-trak mailing list
Elec-trak cosmos phy tufts edu