[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Thin shims
hosfelt.com has 'em although in different voltages. i've used 48v relays
in the past... hosfelt is a surplus electronics outlet so their stock
varies.
Dave
> Bob,
>
> Where did you locate the relay? Did it fit into the same real estate
> as the old relay?
>
> Dave
>
>
> On Apr 20, 2005, at 8:36 AM, Klein Robert W NPRI wrote:
>
>> I installed one of these to replace a burnt out relay and it works
>> great. I also like the fact that it's in a sealed box.
>>
>> Bob
>>
>> -----Original Message-----
>> From: Markus Lorch [mailto:mlorch vt edu]
>> Sent: Tuesday, April 19, 2005 8:14 PM
>> To: 'Christopher Zach'; 'Elec-trak list'
>> Subject: RE: (ET) Thin shims
>>
>>
>>> In related news my tractor's cut-out at full power was related to a
>>> mis-aligned relay. One of these days I will replace all the
>>> relays with
>>> nice 24 volt+resistor ones. Those in there tend to be very particular.
>>
>> Chris,
>>
>> try these:
>>
>> http://www.surpluscenter.com/item.asp?
>> UID=2005041919113835&catname=&qty=1&it
>> em=11-2382
>>
>> They are enclosed, 36V, and seem more reliable than the original ones.
>> Mike Wallace found them originally and told me and at one point posted
>> them also to the elec-trak forum
>>
>> I got me a set but haven't installed them yet.
>>
>> The price is right at $4.99
>>
>>
>> Markus
>>
>>
>> _______________________________________________
>> Elec-trak mailing list
>> Elec-trak cosmos phy tufts edu
>> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>>
>> _______________________________________________
>> Elec-trak mailing list
>> Elec-trak cosmos phy tufts edu
>> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>>
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>