[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ET) E20 Field current

Subject: (ET) E20 Field current
From: "Markus Lorch" <mlorch vt edu>
Date: Tue, 25 Jan 2005 23:17:34 -0500
Importance: Normal
In-reply-to: <026a01c50358$9bbbd1f0$7b00a8c0@Voyager>
List-archive: <http://cosmos.phy.tufts.edu/mhonarc/elec-trak>
List-help: <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=help>
List-id: Electric tractor discussion list <elec-trak.cosmos.phy.tufts.edu>
List-post: <mailto:elec-trak@cosmos.phy.tufts.edu>
List-subscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=subscribe>
List-unsubscribe: <https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak>, <mailto:elec-trak-request@cosmos.phy.tufts.edu?subject=unsubscribe>

> 
> At 36V I think my field draws about 4A. 
> 
correction. I just measured my field (with a cheapo meter) and
I got 17 Ohms. I may be off as I am sure my $20 meter is not too
good at measuring low resistance windings.

36/17 makes about 2.1 A .. 

Markus

Follow-Ups:
- Re: (ET) E20 Field current
  - From: David Roden (Akron OH USA)
- Re: (ET) E20 Field current
  - From: Tim

References:
- RE: (ET) RE: Alltrax DCX300 availability - Field current
  - From: Markus Lorch

Prev by Date: Re: (ET) RE: Alltrax DCX300 availability - Field current
Next by Date: Re: (ET) All fixed
Previous by thread: Re: (ET) RE: Alltrax DCX300 availability - Field current
Next by thread: Re: (ET) E20 Field current
Index(es):
- Date
- Thread