Will a member, maybe Ralph, who has experience with the electronic
controller conversion of the E20, tell me the best way to change
rotation direction on the E20 motor? The original setup of the drive
motor runs best in one direction and is kind of jumpy in the other
direction. Is it OK to run the motor with armature cables reversed so
that the smooth running is in forward gears? The motor now wired in
accordance with supplier provided schematic is jumpy in forward and
smooth as silk in reverse. The motor was tested before the conversion
using two 12v batteries and direction of rotation was reversed by
changing either the polarity of the field (F1 & F2) or the armature (A1
& S2). A comment will be appreciated. Thank you. Raymon Ellis
------------------------------------------------------------------------
_______________________________________________
Elec-trak mailing list
Elec-trak cosmos phy tufts edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak