Re: (ET) motors/decks - bearings

["steves" <ssawtelle fcc net>]

I think that's a large diameter mower motor, right? So it would be a 6203
and 6205 - you will probably want to add the suffix to get double sealed.
You can get different grades - ABEC-1 thru 7 - higher is better. I use the
6661 series (ABEC-1 but meet ABEC-3 standards) from McMaster-Carr.
http://www.mcmaster.com/  page 1015. The base industry numbers are shown
below. The odd thing is they are metric size bearings.

Traction Motor (large frame)
   Small end - 6203
   Large end - 6205

Mower Motor (small diameter)
   Small end - 6201
   Large end - 6204

Mower Motor (large diameter)
   Same as traction motor

SteveS
E20




----- Original Message ----- 
From: "Mr. Shannon Aldinger" <shannon yinyang hjsoft com>
To: <elec-trak cosmos phy tufts edu>
Sent: Friday, June 18, 2004 3:52 AM
Subject: RE: (ET) motors/decks


> On Wed, 16 Jun 2004, Chapin, Tim wrote:
>
> > FYI 1 mower motor on eBay now.  Starting bid 9.98 needs bearings
> >
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=50377&item=4308143135
> > &rd=1&ssPageName=WDVW
> >
>
> Anyone know the inside diameter/outside diameter/width of the bearings 
> for
> the above motor, or any of the various mower motors.
>
> Thanks.
> ---
> Shannon Aldinger
> http://www.aldinger.us/elec-trak/
> 19?? GE E-15 w/ Front Mower
> 1977 GE E8M
>
>
> _______________________________________________
> Elec-trak mailing list
> Elec-trak cosmos phy tufts edu
> https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>
>