[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ET) Tractor ride not smooth
Mine was doing that too!
It had a bad connection on the control card for the field
weakening circuit. So the field would weaken and I would
accellerate rapidly then the weakening would drop out and I would
decellerate rapidly. i.e. bucking
When the belts were loose it didn't jerk, it just didn't get going
very quickly and I could hear them squealing. I dont think it is
possible to overtighten the drive belts, unless you used a large
pry bar.
Both were simple fixes.
---------- Original Message ----------------------------------
From: Humphrey Timothy H Contr AFRL/IFEC
<Timothy Humphrey rl af mil>
Date: Mon, 10 Nov 2003 16:17:31 -0000
>
>
>-----Original Message-----
>From: Richard Zachary [mailto:njcfsa earthlink net]
>Sent: Monday, November 10, 2003 11:17 AM
>To: Elec-trak list
>Subject: (ET) Tractor ride not smooth
>
>
>My tractor bucks some. That is, the ride is herky-jerky. It
seems
>worse in reverse than forward.
>Is there some adjustment I can make?
>Did I tighten the drive belt too much maybe?
>Thanks for any advice you may be able to give.
>
>Zack
>E12
>
>
>
>_______________________________________________
>Elec-trak mailing list
>Elec-trak cosmos phy tufts edu
>https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak
>