[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ET) Dropping the transaxle



I just double checked; the original request was for the E15, so I believe 
my
original response is correct, if it's a double pulley.  Late night...

----- Original Message -----
From: "Christopher Meier" <mr23 mn rr com>
To: <elec-trak cosmos phy tufts edu>
Sent: Thursday, April 24, 2003 11:25 PM
Subject: Re: (ET) Dropping the transaxle


> E8?     Sorry, thought this was for the large frame drive.
> Call Bill and ask him to send you one, and give you the
> part number off the belt; if you need one sooner, then
> buy one at a local retailer, and then keep one as a spare.
>
> ----- Original Message -----
> From: "Garry & Terry Freese" <gtlight vol com>
> To: "Christopher Meier" <mr23 mn rr com>; <elec-trak cosmos phy tufts 
> edu>
> Sent: Thursday, April 24, 2003 7:24 PM
> Subject: Re: (ET) Dropping the transaxle
>
>
> > Does anyone know the belt size for the 26EA8BA  Model.    The E8 M
> Elect-Trak?
> > Garry
> >
> >
> >   At 07:08 PM 4/24/2003 -0500, Christopher Meier wrote:
> > >Bill has the 'right' ones.  Goodyear "MatchMaker" 3VX335.
> > >However, I did get a set once from NAPA.
> > >You'd have to ask Lee Hart what the code is on them, as he has
> > >the tractor they're on.
> > >
> > >-Chris
> > >
> > >----- Original Message -----
> > >From: "Steve Gaarder" <gaarder ecovillage ithaca ny us>
> > >To: "Discussion List Electrac tractor" <elec-trak cosmos phy tufts 
> > >edu>
> > >Sent: Thursday, April 24, 2003 2:16 PM
> > >Subject: Re: (ET) Dropping the transaxle
> > >
> > >
> > > > Okay, sounds do-able.  Since I'll be removing the belts, I suppose 
> > > > I
> > > > should replace them.  Are they an off-the-shelf item or do I need 
> > > > to
> get
> > > > them from Bill?
> > > > thanks,
> > > >
> > > > Steve Gaarder
> > > >
> > > >
> > > >
> >
>