[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ET) tiller motor temperature



John and others,
 
The GE motors aren't labeled, but I'd assume they have a temperature rating the same as industrial motors.  Most industrial motors are rated for a 40 deg C (72 deg F) temperature rise.  Industrial motors can frequently be much too hot to touch when heavily loaded.
 
I believe that tillers when performing normal tilling are expected to move the power meter well into the yellow zone, unlike the mower deck where you should stay in the green.  I don't have a tiller, but my snow blower manual specifically states that the power meter should be in the yellow zone.
 
Hope this helps,
 
Steve Naugler
snaugler earthlink net
----- Original Message -----
Sent: Sunday, June 09, 2002 9:48 PM
Subject: (ET) tiller

Just finished using a tiller for 1-1/2 hours in hard packed sod.  Motor is too hot to touch. Is this normal?
I am thinking about tilling up close to an acre with this. Is that insane?
John Briese