[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ET) chargers
- Subject: RE: (ET) chargers
- From: "SolidTech" <SolidTech qwest net>
- Date: Wed, 1 May 2002 16:53:42 -0600
- Delivered-to: fixup-elec-trak cosmos phy tufts edu@fixme
- Importance: Normal
- In-reply-to: <3CD05721 2F32606D realns com>
- Reply-to: <SolidTech qwest net>
- Sender: owner-elec-trak cosmos phy tufts edu
OK... I know this has been discussed before, but there's a 36V motor speed
controller on eBay as well. It is a PWM model. I have an E-15 and it has
the separate connections for the armature and the field (to enable field
weakening in the higher speeds). The controller only has two connections
and -) for the motor. So, to use this type of controller what happens to
the field weakening - just not used? And if that is the case, then is the
top speed just not as fast? What effect would that have on the lower
in terms of power production - better or worse? Could an "overdrive" be
added that would engage some field weakening once the highest speed was
reached on the controller?
- - joe
E-15 in Colorado
From: owner-elec-trak cosmos phy tufts edu
[mailto:owner-elec-trak cosmos phy tufts edu]On Behalf Of Neil Dennis
Sent: Wednesday, May 01, 2002 2:59 PM
Subject: (ET) chargers
See on e-bay a 36 volt automatic charger and some other stuff by asking
for 36 volt on search. Includes a "super" mower.
wombat - just finished mowing the lawm for first time, some about 6"
high, and from the sound may need a new bearing in a mower motor.
Haven't touched it in about 20 years so no complaints.