[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (ET) Tool receptacle



 

The only ET rotary converter I ever saw was red and had the small twist lock plug on it. I think they were built by Redipower, or some company name or product like that.

 

Google and see if you can fine them.

 

  Dwight

 

 

Dwight L. Hazen, Indiana University, UITS

Bloomington, In. 47408-7378 Phone 812-855-5367 hazen indiana edu

http://php.ucs.indiana.edu/~hazen/ Ham Radio wb9tlh arrl net

IP Phone 317.278.4014   Change is inevitable except from a vending machine.

 

-----Original Message-----
From: Pestka, Dennis J [mailto:Dennis Pestka TycoHealthcare com]
Sent:
Friday, March 08, 2002 2:00 PM
To: 'Gary Woodard'; Lee Richardson; elec-trak cosmos phy tufts edu
Subject: RE: (ET) Tool receptacle

 

Lee;

 

Do you have to be sitting in the seat for the inverter to work ?

All the power accessory tools were made to plug into the small receptacle because it is live at all times.

 

The large receptacle works off the PTO switch and for that to work the seat safety switch must be engaged.

The Welder has 2 wires that clip on to the safety seat switch to override it.

 

I talked to Bill Gunn and he didn't know of any inverters that were made to plug into the large receptacle.

He thought that maybe someone had modified yours with the larger plug.

 

Dennis

 

 

 

 

 

 -----Original Message-----
From: Gary Woodard [mailto:farmallcub57 yahoo com]
Sent:
Friday, March 08, 2002 12:19 PM
To: Lee Richardson; elec-trak cosmos phy tufts edu
Subject: RE: (ET) Tool receptacle

Lee:

  Is yours G.E. or Wheelhorse?  I know they looked the same, except for the color. I looked through all my Wheelhorse and G.E. literature and didn't find any pictures of G.E. rotary inverters. Only a G.E. Model AP60 "non-rotary" rated at 1000 watts for 5 hours (8.5 amps at 117 volts). Both the G.E. non-rotary and the Wheelhorse rotary in my literature plug into the smaller receptacle. However, I'm sure that I have seen a G.E. rotary somewhere that plugged into the larger mower receptacle. There may have been different units available from time to time.  My 120 volt chain saw draws 10 amps(label), but a rotary unit would power that on an intermittent basis. The Wheel Horse literature only gives a 120 volt rating. No wattage or amperage rating. Does anyone else have any literature on G. E.'s rotary inverter ratings?

Gary

  Lee Richardson <lrichard jbc edu> wrote:

At 08:30 AM 03/08/2002 -0500, Pestka, Dennis J wrote:
>I also have a rotary.
>It was made for my Wheelhorse model C-185.
>It is suppose to supply about 7 amps of 110VAC.
>
>Do you know how many amps yours will supply ?


>From Lee:
No! However I have used it for years to power electric chain saws which I
think draw between 10 and 12 amps. But I'm not sure even about that.

I looked at the picture. It looks like the same animal. But I swear, mine
plugs into the big socket. I turn it on and off with the 'mower' switch.

 


Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!