[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ET) amps
- Subject: RE: (ET) amps
- From: "Elie, Larry (L.D.)" <lelie ford com>
- Date: Thu, 1 Nov 2001 09:54:23 -0500
- Hop-count: 1
- Sender: owner-elec-trak cosmos phy tufts edu
I've measured the lights; less than 5 amps as I recall. I haven't
measured the controls or the lift, but neither show on the panel meter as
a needle wiggle for me. The max sounds like the limit of a wire, switch
or contactor.
Larry Elie
-----Original Message-----
From: Jeremy Gagliardi com [mailto:Jeremy Gagliardi com]
Sent: Thursday, November 01, 2001 9:49 AM
To: Elec-Trak
Subject: (ET) amps
As written over the fuse block:
-Lights 20 amps
-Controls 20 amps
-Lifter 30 amps
The Lights & Controls are hooked in parrallel, so I assume that's 20
amps together. They are all hooked into a breaker that is rated at 50
amps. Do lights & lift together really draw 50 amps, or is that just a
convenient maximum?
--
(============================)
mailto:Jeremy Gagliardi com
http://Jeremy.Gagliardi.com/
(============================)