[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ET) pegged meter
- Subject: (ET) pegged meter
- From: Neil Dennis <wombat RealNS com>
- Date: Tue, 04 Sep 2001 08:28:13 -0400
- Sender: owner-elec-trak cosmos phy tufts edu
Probably poor connection on shunt wire, it is very critical as to
resistance. Mine was less than 1" too long, meter was always in red or
pegged - cut to correct length which is given dimension hole center to
hole center of lugs - then ok.
I'd check it right away or replace it - you don't want to lose the meter
if it gets worse.
wombat