(ET) FW: More Help please

[ThompsonG DFO-MPO GC CA]

Hi
It's me again, I started track down the CKTs on my E12M. I think I found a
problem but I would like to confirm it with the group. When I got my ET the
power disconnect had been removed so I am trying to undo the creative 
wiring
done by the previous owner. 
 
I got a new disconnect switch form Bill Gunn. 
 
This is what I got now. 
#6 wire (large)  No. 1 from one terminal of the switch to  (+) terminal of
Battery 1 in the front compartment.
 
On the other terminal of the disconnect a green wire that goes to the  
power
use meter and a Medium sized wire No 2 that goes to the front of the 
tractor
where the charge should be. The charger is disconnected and out of tractor,
the end of this  wire No2 isin the front of the tractor is wrapped in
electrical tape.  
 
I have another #6 wire No 2 that is connected to Terminal no 2 of the PTO
that goes to Terminal no SO-2 on FI,
 
There is no wire from the PTO terminal 2 to the disconnect. 
 
The question is,  Am I missing a wire from Term 2 of the PTO to the  power
disconnect  (Manual say 18.25" shunt of #6 wire) or should the No 2 wire
connected to FI actually be removed and re- connected to the power
disconnect?

Thank in advance.
 
I