[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Fw: (ET) Fork lift specs.
- Subject: Fw: (ET) Fork lift specs.
- From: "Garry & Terry Freese" <gtlight vol com>
- Date: Thu, 5 Apr 2001 21:42:43 -0400
- Sender: owner-elec-trak cosmos phy tufts edu
Which model?
There are Models CF48, CF74, CF92, Including CF65 Counterweights and CF66
Overhead Guard.
The 750-pound capacity rating on all lifts is dependent upon the 200 pound
CF65 Counterweight. To conform to the ANSI B56.1 specification as required
by OSHA regulations, the CF66 Overhead Guard is also required.
WARNING: Do not exceed the lift capacity rating of 750 pounds at 18-inch
load center! Do not attempt lifting with the fork tips!
I personally have the CF92. It raises to 92 inches, so I'm sure you now
know the height of the other models. It is a great piece of equipment to
have around the work shop. Just last night I took off the pickup a 55
gallon drum of Shell oil for my Dodge diesel.
I have not seen the Model CF48.
I also have the AL40 Bucket Loader and would NOT consider selling either of
these handy work horses for less then $1,500.00
Hope this E-mail is of help.
Garry Freese
gtlight vol com
----- Original Message -----
From: "RJ Kanary" <rjkanary nauticom net>
To: <Elec-trak cosmos phy tufts edu>
Sent: Wednesday, April 04, 2001 8:19 PM
Subject: (ET) Fork lift specs.
> I have had an inquiry about the load capabilities of the fork lift
> attachment for the Elec Trak®. Does anyone out there posses the weight
> rating, and lifting height specifications ? Thank you ,in advance !
>
>
> RJ Kanary @ Bandi Bros. Inc.
> Member TRNi Since 1998
> ASE® Certified Master Auto Technician
> Member Tech Line Associates Since 1987
> rjkanary nauticom net
>
>