[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ET) ET powered chainsaw
- Subject: RE: (ET) ET powered chainsaw
- From: "Pestka, Dennis J" <Dennis Pestka mkg com>
- Date: Thu, 15 Mar 2001 11:02:33 -0600
- Sender: owner-elec-trak cosmos phy tufts edu
Allan;
Along with a lot of others, I also looked into this.
I wish I could find an original 36vdc saw but so far no luck.
In the meantime I bought a small Remington pole saw that I run off my
rotary
inverter.
Haven't given it a good workout but it seems to work pretty fair.
I heard that there are 12vdc saws available, another option.
Tony Bailey has one. He may be able to fill you in on how it works.
Also check the Elec-Trak discussion list archives for a lot of old
discussion on this topic.
Good luck;
Dennis
Has anyone found a really good way to have an electric chainsaw powered
from
the ET? Seems to me there are only a few options:
1. Find an original ET chainsaw
2. Find a powerful enough inverter to run a regular chainsaw
3. Find an AC chainsaw which can run on 36VDC
Any suggestions?
Thanks,
Allan
Paul and Sue Abendroth wrote:
> >Lee Richardson wrote:
>
> >I have a B&D electric that's extremely light and easy to push. That
> >plus
> >an electric weed-whacker, an electric leaf blower, and an electric hand
> >tiller, makes my E-15 a very versatile yard and garden tool.
> >I also have an electric chain saw which cuts a lot of wood, which I then
> >haul in with a trailer.
>
> I removed the motorcycle batteries from mine and added a cord to plug
> into
> the accessory connection of my ET. I drive the ET to the area and push
> the
> B&D around the edges. Really light that way.
>
> Paul and Sue Abendroth
> pabendro gemair com
> our permanent address is pabendroth dma org