[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ET) Wheel Weight Color?
- Subject: RE: (ET) Wheel Weight Color?
- From: "Hazen, Dwight L" <hazen indiana edu>
- Date: Tue, 4 May 1999 11:36:06 -0500
- Sender: owner-elec-trak cosmos5 phy tufts edu
48 volts? ok, I have to hear about this. how about 42 volts? Take the
charger out and put a seventh battery in ?
Dwight
> -----Original Message-----
> From: Chris Meier [SMTP:ChrisM pptvision com]
> Sent: Tuesday, May 04, 1999 12:14 PM
> To: 'Larry Elie'; elec-trak cosmos5 phy tufts edu
> Subject: RE: (ET) Wheel Weight Color?
>
> I don't know what the voltage limit is for the mower motors, or how it
> might affect cutting, but since you are experimenting anyway.... how
> about increasing the voltage to cut the current draw, which must be
> higher due to increased work demand (more cutting, more air
> friction...).
> Convert up to 48v. Since others have converted their Electraks to 48v,
> likely they are running the mower decks at 48v too. Those of you who
> have, has it changed cutting performance?
>
> > -----Original Message-----
> > From: Larry Elie [SMTP:lelie ford com]
> > Sent: Tuesday, May 04, 1999 9:01 AM
> > To: elec-trak cosmos5 phy tufts edu
> > Subject: RE: (ET) Wheel Weight Color?
> >
> > I don't know for sure (have seen white and yellow) but my E-12 has RED
> >
> > back wheels, and the paint was original.
> >
> > BTW, on the subject of mulching with dual blades; I ran the battery
> > down
> > in less than half an hour. One motor was hotter than the others (not
> > the
> > one I moved a flange on-- with a die grinder btw) but I didn't check
> > with my
> > clip-on meter-- yet. I'm not sure why one motor would run hotter but
> > I'm
> > guessing it's also taking more current. Bummer.
> >
> > Larry Elie
> >
> >
> > ----------
> > From: Dave Stensland[SMTP:electron megsinet net]
> > Sent: Monday, May 03, 1999 11:20 PM
> > To: elec-trak cosmos5 phy tufts edu
> > Subject: (ET) Wheel Weight Color?
> >
> > I'm in the process of painting my newly aquired E12M. The wheel
> > weights
> > that came with my machine are red, but that doesn't seem right.
> >
> > What's the official color of Elec-Trak wheel weights?
> >
> > -Dave in Illinois
> > (My guess is white.)
> >