[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ET) Arctic antic
- Subject: RE: (ET) Arctic antic
- From: Larry Elie <lelie ford com>
- Date: Fri, 29 Jan 1999 16:47:59 -0500
- Sender: owner-elec-trak cosmos5 phy tufts edu
Back on topic...
----------
From: Rhett T. George[SMTP:rtg ee duke edu]
Sent: Friday, January 29, 1999 2:12 PM
To: elec-trak cosmos5 phy tufts edu
Subject: (ET) Arctic antic
- Greetings -
Yes, please move the refrigerator and other Arctic Antic to some other
forum.
Breakage of the welded joint on the top back corners of the rear cover:
This seems to be a highly loaded juncture when the cover is up since
the weight of the seat pulls the assembly backward with a bit of force.
I am welding the joints with fill metal rather than attempting a sort
of spot weld. If you have had this problem, how have you solved it?
This plagued and inquiring mind wants to know.
Rhett George
I drilled (4) clearance holes for #6-32 screws, and used screws and nuts
through
the hinge. I have seen pop-rivits used as well. Watch the screw length
carefully.
Larry Elie