Hi,
Would you by chance have a manual lift for as mid mount mower deck? I have a egt 150 with a very tired electric lift and would like to change it to the manual lift.

Thank you 

On May 4, 2026 1:36 PM, Dean Stuckmann via Elec-trak <elec-trak@cosmos.phy.tufts.edu> wrote:

Hi,

I've been catching up on some of the emails regarding parts and have decided to start moving some of my “spare” stuff. I started with Elec-Traks in 1980 and have amassed lots of spares over the years that I’m ready to part with now that I’m 70. I’m guessing that everything in this list should get new bearings.

- E15 that went thru all the motor speeds when jumped from one of my other ETs.
- 6 mower decks including one belly mower
- 2 snow blowers including one with center motor
- 1 tiller but no brackets, mount or lift. I do have brackets for my other tiller that it would be used as a template for somebody if they needed to make them. The rear ET lift is painfully slow, so I think you're better off using a small winch for that task anyway.
- Powered lawn sweeper but basket need re-sewing
- various motors and electrics from dismantled machines.

I’m guessing that everything in this list should get new bearings.

If anything is of interest email me directly. Thanks

Regards,

Dean Stuckmann
5432 County Road U
Newton, WI 53063-9624

920-901-2288

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20260504/754495d9/attachment.htm>
_______________________________________________
Elec-trak mailing list
Elec-trak@cosmos.phy.tufts.edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak