I am looking for assistance from the group on my dead EGT-150. During normal operation the tractor stopped during a routine run with the dump cart. Batteries are fine and all of the connections that I have checked are as well. I replaced the key switch, ceramic resistor and diode varisitor with NOS units. I thought that I had found the problem with the key switch that indicated it to be defective. However, after replacing all these components I still can't get either of the electrical relays to lock in. I have checked fuses, brake and seat switches and visually inspected a good share of the wiring which all appear in good condition.
My reference material includes the New Idea Lawn & garden Parts and Service Manual. Those familiar with that publication know that it is short on diagnostic procedures. The EGT-150 does not have "cards" like the GE tractors so the theory of operation is different. I presently am at a loss as to what to check next.
Weatherman says expect some heavy snow about mid November and I rely on this machine to power a snow blower.
Thanks in advance,
Chris Weinreich
Northwest Iowa