They are easy to make using U bolts and some angle iron. I made a few pairs for some ET'ers years ago. I found a homeade one in my junk pile. You are welcome to that, i would just ask for shipping.


----------------------------------------------------------------------

Message: 1
Date: Mon, 24 May 2021 15:54:35 -0400
From: Mike Finck <mikefinck@rocketmail.com>
To: "elec-trak@cosmos.phy.tufts.edu" <elec-trak@cosmos.phy.tufts.edu>
Subject: (ET) set of axle brackets
Message-ID: <97A431DE-9391-4C2B-9BA6-BE5AA973C61A@rocketmail.com>
Content-Type: text/plain; charset="us-ascii"

Sirs,
I am looking for a set of axle brackets for the implement bar. Any around? Thanks.
Mike

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_3193.jpg
Type: image/jpeg
Size: 425910 bytes
Desc: not available
URL: <http://cosmos.phy.tufts.edu/mhonarc/elec-trak/attachments/20210524/283b0df1/attachment.jpg>
-------------- next part --------------


Sent from my iPhone

------------------------------

Subject: Digest Footer

_______________________________________________
Elec-trak mailing list
Elec-trak@cosmos.phy.tufts.edu
https://cosmos.phy.tufts.edu/mailman/listinfo/elec-trak


------------------------------

End of Elec-trak Digest, Vol 19, Issue 23
*****************************************